Summary: I have a 2.88 3 1/2 floppy that I can't seem to install dos from. Can I used 1.44 Disk or not ? This is a older IBM computer Was going to switch to a ...
Summary: There was no setup disk in it so it must be ROM. Fdisk shows only the dos partition so I don't think it's like the old compaq's with the setup partit...
Summary: I have a comment/question in your original post you said the floppy was connected to the motherboard with a 'tape' connector. If you mean the cable ...
Summary: Sure! Here are the specs: Made in 1983 8088-I think AMD *Two Full Height original IBM floppy drives with full length controller card *IBM 5151 Monochr...
Summary: I am trying to install a 2.88 IBM floppy drive , FRU 52g3400 on my computer. Here goes. I have a 586 low end pentium IBM I upgraded myself. It has...
Summary: I just build me my "jack of all trades computer system,14" IBM monitor(they really last a long time)10 gig hd 266mhz cpu 32mb ram, 5 1/4 floppy 1.44 ...
Summary: can someone please tell me why my 1.44 IBM Format floppy drive can't read IBM floppy disks. It prompts me to Format the IBM formatted disks....
Summary: No problem! All you have to do is install your floppy as a "tape" drive... - Go to Control Panel - Now choose "Tape Devices" - Select "Detect". Your...
Summary: This page for taper claims you don't need to erase with SCSI or floppy tape drives, unless you have a floppy tape and ftape version <3.03. ...
Summary: when i installing IBM(Seagate) DAT Drive 20/40/dds4/4mm in novell 5.1, its giving Binding error in novell. Please give me the proper solution for that...
Summary: 1.) Is there anyway to run ibm dos programs on an apple IIe with dos 3.3 and prodos? 2.)there is a cassette in/out plug in the back of my apple, can i...
Summary: If you have another computer with a good floppy drive and a CD drive, you don't need a large number of floppy disks. Using the method of installing f...
Summary: CP Backup - Central Point Software. I believe CP Backup was part of Central Point Utilities. The software was a replacement for that provided by vari...
Summary: Obviously your parts collection is pretty sparse. I wouldn't bother with a tape drive because new tapes are relatively expensive and you need the pro...
Summary: The IBM PCMCIA option is for the external IBM Floppy Drive, do you have a Floppy Drive ? If not you will need to put the hard drive in a PC......... ...
